Betekenis van:
surface fire

Voorbeeldzinnen

1. Protective clothing for fire fighting — Protective clothing with a reflective outer surface:
2. Immediately following the ignition, the fire shall produce flame impingement on the surface of the container, along 1,65 m length of the fire source across the container;
3. heat or fire hazard, such as a heater fan that overheats, catches fire and causes burns; thermal hazard, such as the hot outer surface of an oven that can cause a burn;
4. A uniform fire source of 1,65 m length shall provide direct flame impingement on the container surface across its entire diameter.
5. The watchglass is placed on a fire-resistant surface within a draught-free area that may be ventilated after each test.
6. Low flame spread means that the surface thus described will adequately restrict the spread of flame, this being determined in accordance with the Fire Test Procedures Code.
7. .8 Low flame spread means that the surface thus described will adequately restrict the spread of flame, this being determined by a fire test according to IMO Resolution A.653 (16), for bulkhead, ceiling and deck finish materials.
8. .8 Low flame spread means that the surface thus described will adequately restrict the spread of flame, this being determined by a fire test according to IMO Resolution A.653(16), for bulkhead, ceiling and deck finish materials.
9. Metallic coated steel sheet, profiled or flat, of nominal thickness t (mm) and coated on the surface exposed to the fire with a plastisol coating of maximum nominal thickness 200 μm and having a coating mass ≤ 300 g/m2 and a PCS ≤ 7,0 MJ/m2.
10. Metallic coated steel sheet, profiled or flat, of nominal thickness t (mm) and coated on the surface exposed to the fire with a polyester coating of maximum nominal thickness 25 μm, according to the relevant part of EN 14782 and EN 10169, if the coating has a mass of no more than 70 g/m2 and a PCS of no more than 1,0 MJ/m2.
11. By Regulation (EC) No 1212/2005, the Council imposed a definitive anti-dumping duty on imports into the Community of castings of non-malleable cast iron of a kind used to cover and/or give access to ground or sub-surface systems, and parts thereof, whether or not machined, coated or painted or fitted with other materials, excluding fire hydrants, originating in the People’s Republic of China (‘PRC’) (‘the product concerned’), normally declared within CN codes 73251050, 73251092 and ex73251099 (Taric code 7325109910).
12. A definitive anti-dumping duty is hereby imposed on imports of castings of non-malleable cast iron and spheroidal graphite cast iron (ductile iron) of a kind used to cover and/or to give access to ground or sub-surface systems, and parts thereof, whether or not machined, coated or painted or fitted with other materials, excluding fire hydrants, originating in the People’s Republic of China, currently classifiable within CN codes 73251050, 73251092, ex73251099 (Taric code 7325109910), and ex73259910 (Taric code 7325991010).’.